HP 8360 manual Pulse an/Off Ext

Menu Map 4

Description This description is for the Pulse Menu softkey for synthesizers with

Option 002. For the standard 002 Pulse Menu softkey go to the “Pulse Menu” heading that precedes this one.

This softkey accesses the pulse modulation softkeys. These softkeys engage external, internal, and scalar pulse modulation. They allow you to define the rise time, and give access to the internal menu for defining the parameters of the internally-generated pulse modulation.

Pulse an/Off Ext

Toggles on and off the pulse modulation mode for an external pulse source.

Pulse an/Off Scalar

Toggles on and off the internal scalar modulation mode.

Pulse an/Off Int

Toggles on and off the internal pulse modulation mode.

Int em al Menu Gives access to the internal menu for defining the parameters of the internally-generated pulse modulation.

Pulse Rise Time Fast

Applies a fast rise pulse filter to both internal and external pulse waveforms.

Pulse Rise Time Slow

Applies a slow rise pulse filter to both internal and external pulse waveforms.

Pulse Rise Time Auto

Automatically applies the appropriate filter

(fast or slow) to both internal and external pulse waveforms.

I n v e r t I n p u t Inverts the pulse input logic. When active, a +5 V input turns RF power off.

Programming Codes SCPI: NONE, see the individual softkeys listed. Analyzer: NONE

See Also (MOD), also see “Modulation” and “Pulse”.

HP 8360	Operating and Programming Reference P- 17
User’s Handbook