HP 8360 Menu Map, See Also, Marker Ml, Marker M2, Marker M3, Marker M4, Marker M5, Description, Ml--M2Sweep, Amp1 Markers, Center=Marker, Delta Mkr Ref

Function Group MENU SELECT

Menu Map 3

Description This hardkey allows access to the marker functions.

Amp1 MarkersCenter=Marker

Causes the synthesizer to display markers as an amplitude pulse.

Changes the synthesizer’s center frequency to the value of the most recently activated marker.

Delta Marker Display the frequency difference between the active marker and the marker designated by the softkey Delta Mkr Aef .

Delta Mkr RefMl--M2 SweepMarker MlMarker M2Marker M3Marker M4Marker M5Markers A11 OffStart=Ml Stop=M2

Reveals the softkeys in the delta marker reference menu.

Causes the synthesizer to sweep from Ml to M2.

Makes Ml frequency the active function.

Makes M2 frequency the active function.

Makes M3 frequency the active function.

Makes M4 frequency the active function.

Makes M5 frequency the active function.

Turns off all markers.

Changes the synthesizer start and stop frequencies to the values of Ml and M2.

The markers are functional whenever an asterisk appears next to the key label, but only one marker can be active at a time. The active marker is indicated in the active entry area.

See Also Softkeys listed above.

“Marker Operation,” in Chapter 1.

“Programming Typical Measurements,” in Chapter 1.

HP 8360	Operating and Programming Reference M-3
User’s Handbook