HP 8360 manual Power iZiG, Function Group P O W E R Menu Map

POWER (iZiG)

Function Group P O W E R

Menu Map 5

Description This hardkey accesses the power function softkeys.

F’ltness Menu

Power Offset

Accesses the softkeys in the flatness correction menu.

Changes the displayed power to include an offset, but does not change the output power of the synthesizer.

Power Slope

Power Sweep

Set Atten

Tracking Menu

Uncoupl Atten

Up/Dn Power

Activates the linear, power-per-frequency mode of power output, and makes RF slope (dB/GHz) the active function.

Activates power sweep mode and makes power sweep (dB/swp) the active function.

Activates uncoupled attenuator as the mode of operation and makes the attenuator value the active function.

Accesses the softkeys in the tracking calibration menu.

Uncouples the attenuator from the ALC system.

Allows you to enter values for the power level step size.

All RF power functions except for power level, flatness on/off, and RF on/off are contained in the power menu.

Programming Codes

See Also

SCPI: NONE

Analyzer: NONE

Softkeys listed above, @, [FLTNESS ON/OFF], (POWER LEVEL), and (@Fifqq.

“Getting Started Basic” and “Getting Started Advanced,” in Chapter 1.

“Programming Typical Measurements,” in Chapter 1.

HP 8360	Operating and Programming Reference P-5
User’s Handbook