Lexicon MPX G2 Echo M, Echo S and Echo D, The Echo effects are similar to, pole low-passfilters

		The Effects and Parameters
Echo (M), Echo (S) and Echo (D)
Echo (M)		The Echo effects are similar to
		the Delay effects, except the feed-
		back inputs are sent through 1-
		pole low-pass filters.
		Damp provides control over the
		cutoff frequency of the filter. (In-
		creasing Damp lowers cutoff fre-
		quency.)
	Echo (S)

Echo (D)

Mix	0-100%	Dry/Wet ratio
Level	Off, -89 to +6dB	Amount of effect in the processed signal
Time	0-20000ms	Delay time in mono version
	1:24-24:1echo/beat,
	0-22600 ft, 0-6880 M
(Time Units)		Selects ms, note, feet, meters, or Tap ms
Time1	0-10,000ms	Left delay time
	1:24-24:1echo/beat,
	0-11,300 ft, 0-3440 M
(Time1 Units)		Selects ms, note, feet, meters, or Tap ms
Time2	0-10,000ms,	Right delay time
	1:24-24:1echo/beat
	0-11,300 ft, 0-3440 M
(Time2 Units)		Selects ms, note, feet, meters, or Tap ms	21		190
Lvl 1*	Off, -95 to 0dB	In Echo (D) controls left delay output level
Lvl 2*	Off, -95 to 0dB	In Echo (D) controls right delay output level
				Echo (M)
Fbk 1	-100 to +100%	Left feedback level
			31		190
(Fbk insert)	Effect1, Effect2,Chorus,	The outputs of the selected source are scaled by Fbk
	Delay,Reverb,EQ
Fbk 2	-100 to +100%	Right feedback level
				Echo (S)
Damp1	0 to +100%	Cutoff frequency of low-pass filter in left feedback path	190
				40
Damp2	0 to +100%	Cutoff frequency of low-pass filter in right feedback path
Clear	Off, On	When On, mutes and resets the delay
				Echo (D)

*= Interpolated; ( ) = Option of preceding parameter

7-31