Lexicon MPX G2 manual select nn Effect Name, nnavailable XXX of 190 used, Effect Editing

Editing

3

This chapter describes all of the MPX G2 edit functions. As the first thing you are Editing likely to want to modify in a program are its effects, this section starts there and

then moves on to all of the functions available in Edit mode.

Effect Editing

To edit any effect, press Edit, then press an Effect button to view all of the Effects of that type, and to edit the parameters of the current Effect. The display will show the Effect type and the name of the currently loaded Effect . Turn the knob to view other Effects of the displayed type.

This indicator shows	that
Options are available	Knob scroll

	FX 1■
Arrow scroll	>

select: ▲▼ nn

✱Effect Name

Number of processing steps used for this effect

The Effect name will be marked with an asterisk (✱) and the Effect button light will blink rapidly if the displayed effect can be loaded in the current program. (Press and hold the Effect button to display the name of the Effect currently in use.)

An X appears in place of the asterisk if there are not enough DSP resources to load the effect. Two seconds after an algorithm is selected with the knob, the following screen will appear briefly, showing the number of resources available:

number of processing steps remaining

Number of processing steps used (including the currently running effect)

nnavailable XXX of 190 used

3-1