Lexicon MPX G2 manual Midi, Program Change, Receive, Transmit, Options: Pgm# Offset, Pgm+ and Pgm

System Controls

Once you've made changes to the Setup name or selected a new number for it, press Store again. The display will show:

Are you sure?

Yes or No

To store your new Setup, press Yes. To return to the Setup Store display without saving the Setup, press No.

This menu contains all of the MPX G2 MIDI controls. The operation of each of these controls is described here. More information on working with MIDI is presented in Chapter 6.

The Pgm Change control allows you to enable or disable the Reception of MIDI Program Change messages. The manner in which the MPX G2 interprets these messages is determined by your selection here.

Off All Program Change and Bank Select messages are ignored. Pgm + and Pgm - will load the next higher or lower program.

On Program Change messages are recognized.

Options: Pgm# Offset, Pgm+ and Pgm-

Pressing Options from the Pgm Change display allows you to offset MPX G2 program numbers to match another MIDI device.

From Options you can also map Pgm+ and Pgm- controls to load the next higher or lower program. The following sources can be selected to activate these controls:

None

Tog 1-3

Sw 1-3

CC 1-119

MIDI

Program Change

Press Options to access Pgm+ and Pgm- controls and to set a program number offset. Press Options again to return to the MIDI menu.

Select MIDI Channel 1-16, OMNI or Off for receipt of MIDI messages.	Receive
Select MIDI Channel 1-16,or Off for transmission of MIDI messages.	Transmit

5-7