Lexicon MPX G2 manual new: Looper old: Echo S

MPX G2 User Guide Lexicon

Copy Effect Copy Effect lets you take an Effect from any program in the MPX G2 and copy it into the current program. To use this function, select Copy Effect from the Edit menu. Press the > button and use the knob to display any of the MPX G2 programs. The front panel Effect buttons light to show you which effect blocks are active in the displayed program. Press any lit button to display:

The name of the effect from the displayed program appears on the upper line.

new: Looper

old: Echo (S)

The name of the effect you will be replacing in the current program appears on the lower line.

When you select Copy Effect, the active

effects of the displayed program are lighted. Press any lighted but- ton to initate the copy procedure.

The button will flash. Once you have selected

the specific effect you want to copy, press the effect button again to complete the procedure.

The effect button will flash to show that it is selected for copying. Press it to copy the effect you selected into the current program. If the copy procedure is successful, a confirmation message will be displayed briefly, and the display will revert to showing the Copy Effect selections.

As different effects vary widely in the amount of processing they require, not all combinations of effects are possible. If the current program is already using many effects, or if it is using a combination which requires maximum processing power, a message will be displayed informing you that there are not enough resources to run the effect you have selected. If this happens, you can try copying another effect, or you can copy an inactive effect (by pressing an unlit button running "No Effect") to reduce the processing requirements.

Note that patches are not copied along with effects.

Press Edit to exit to the main Edit menu.

3-22