Lexicon MPX G2 manual Dynamic Midi, Continuous range, Released, Trigger

The following MIDI controllers are available as Dynamic MIDI patch sources:

MIDI Controllers
1-31, 33-119	Continuous or switches: 0–127
Pitch Bend	0=max flat, 64=no bend, 127=max sharp
After Touch	Channel pressure: 0–127
Velocity	Note On velocity value of last received note: 1-127
Last Note	Note Number value of last received note: 0-127
High Note	Note Number value of highest note when more than one note
	is on: 0-127. (Same value as Last Note when only one note is
	on.)
Low Note	Note Number value of lowest note when more than one note is
	on: 0–127. (Same value as Last Note when only one note is
	on.)
Tempo	MIDI or internal tempo ranging from 41–400 BPM converted to
	a continuous range of 0–127.
Clock Commands	MIDI Clock commands received as a switch: Start and Con-
	tinue=127, Stop=0
Gate	Generates 127 when any note is on and 0 when all notes are
	released.
Trigger	Generates a pulse (0, 127, 0) everytime a Note On is received.
Legato Gate	Generates 127 whenever two or more notes are on and 0
	whenever fewer than two notes are on.
Touch Switch	Toggles between 0 and 127 whenever After Touch rises above
	32 (allowing After Touch to be used as a latching switch).

MIDI Operation

Dynamic MIDI

These MIDI controllers are also available as threshold sources for several modulation parameters such as LFO1 and 2. They may also be used as a tap source for controlling Tempo.

The System mode MIDI menu provides a Dump control which allows selection Bulk Data Dumps of the following types of bulk data to be dumped directly from the MPX G2 to

another MPX G2, or to editor/librarian software. Options allows you to select MIDI transmit speeds of Slow, Medium Slow, Medium Fast or Fast.

Displayed Name	Description
CurrentPgm	Currently running effect
All Programs
Map 1-3	Internal Program Change Maps
Chain 1-10	Internal Program Chains
Setup 1-5	Internal Setups

With the dump type you want displayed, press Store to transmit the data .

6-7