Lexicon MPX G2 manual Mix, 100%, Effect Select Option Toe Switch when an MPX R1 is connected

MPX G2 User Guide

Coarse and Fine Editing of ms and Hz values

Parameters whose values are dis- played in ms or Hz have overall ranges of more than 1000 units. When you select one of these pa- rameters for editing, you’ll notice that either the left or right portions of the value can be selected for editing. For quick, coarse adjustments, se- lect the left portion of the value. For fine adjustments, select the right portion of the value. The fine and coarse increments for each type of parameter are:

ms (delay times) coarse increments=100 ms fine increments=1ms

Hz (LFO rates) coarse increments=1 Hz fine increments=.01Hz

Hz (EQ Fc) coarse increments=100 Hz fine increments=1Hz

Lexicon

If there are not enough resources available to load the effect you want, another effect must be removed from the program to make resources available.

To load any available Effect, press the Effect button again. The asterisk will disappear from the displayed name and the button light will return to its normal slow blinking edit state. An edit indicator is displayed to indicate that the active program has been modified.

To edit the parameters of the current effect, press > . The display will show one or more parameters as shown below.

An edit indicator appears in front of the parameter name if the value has been changed since the last store operation.

A patch indicator appears be-			One	or two parameters will be
			shown on each parameter screen.
fore the parameter name if it is
controlled by a patch.						Parameter	values
The Effect type is	FX 1	P.Mix			Level
						are shown on the
shown in the upper	< > ❚	100%			0 dB
left of the display.						bottom line	of the
						display.

Effects with Rate and Depth, or	Fields which are selected
other dynamic parameters,	for changing will blink.
have animated meters here.

Press Options to set the MPX R1 Toe Switch to control Bypass

of the effect, or to disable the Toe Switch.

The item on the lower line of the display which is selected for adjustment will flash. Turn the knob to scroll through the entire range of parameter values. Use the < and > buttons to select another parameter value field and to move to another parameter screen.

Detailed information on each Effect and its parameters is provided in Chapter 7.

Press Edit to return to the main Edit menu.

Effect Select Option: Toe Switch (when an MPX R1 is connected)

When an MPX R1 MIDI Remote Controller is connected to the MPX G2, the Toe Switch option allows you to use the R1 Toe Switch to turn the effect you are editing on, to bypass it, or to specify that the Toe Switch have no effect.

This powerful feature allows you to group different effects to be turned on or off whenever the MPX R1 Toe Switch is pressed. For example, set Wah for Off=Bypass and set Chorus for On=Bypass to switch between a Wah and Chorus whever the Toe Switch is pressed.

To assign a Toe Switch function to an effect you are editing, press Options from the FX select: display. Use the knob to select On = Bypass, Off = Bypass or disabled. Once you have made your selection, press Options again to return to Effect Edit mode.

3-2