Lexicon MPX G2 manual Product Overview, The Front Panel

Product Overview

1

Product Overview

The Front Panel

Program*

Activates Program Mode where you can select and load programs and see which effects are active in any program.

Input/Output

Dual-function knob controls input and out- put levels.

Level and Clip LEDs indicate presence of signal and overload (input signal greater than -0.1dB).

Guitar

Guitar input. ( o v e r r i d e s rear panel in- put.)

Effect Select: Gain, Effect1, Effect2,

Chorus, Delay, Reverb, EQ

Buttons light to indicate effect is active. In Program mode, pressing button turns off LED and bypasses effect. In Edit mode, pressing button selects effect parameters for editing.

Tap

When Tempo LED is flashing, sets tempo. Press twice in rhythm to establish tempo rate. Press once to reset LFO.

Options

LED lights to indicate op- tions exist for the displayed parameter. Press to access options. (LED will flash while options are dis- played.) Press again to exit.

In Program mode, accesses DataBase sorting selection.

Soft Row

Press at any time for instant access to key editing parameters for the current program.

*In Autoload (default), displayed programs load automatically. In Manual mode, press Program to load any displayed program.

Edit

Activates Edit mode for access to all parameters of the currently loaded effect.

		A/B						Power
Low, Mid, High		Activates a variable glide be-						On/Off.
Bass, midrange and treble gain controls for
		tween patched parameters.
the Gain effect in the current program.							Store
							Initiates program
				Insert			store function.
	Display			Activates or bypasses
	Aux In LED lights to indicate presence of signal at the			the Insert.
						System
	Aux Input. The green Clip LED lights to indicate over-
						Activates System mode
	load at the Aux Input. The MIDI LED lights to indicate		Bypass			parameters such as auto or
	incoming or outgoing MIDI data.		Bypasses currently loaded			manual load, MIDI dumps,
	3-Digit Display indicates ID number of currently loaded		program. When held, activates			I/O configuration, etc.
	program, patch or tuner value.		the built-in tuner.
	Two rows of 16 characters display program and effect
	names, parameter names and values, help and alert				Knob and < >
	messages and tuner information. An edit indicator				Knob selects programs, <and > adjust
	shows edited effects.				the displayed parameter's value and
	Tempo LED flashes in time with current tempo rate				enter Yes and No responses to screen
					queries.
	when Tap is active.

A/B LEDs light to indicate A/B function is active.

1-1