PX3
Setting up, program selection & tuner mode
∙Connect Cables.
∙Turn the power switch on. First “click” turns on the power, second “click” turns on the Backlit LCD (when using batteries, use only when needed to save battery life)
∙Set the Input level switch (H: High output humbucking pickups) (L: Low output single coil pickups)
∙Use the +/- buttons to select a program.
∙Use the Value Dial to adjust the master level.
∙Bypass /Mute operation - Press the Bypass/Mute and all the Effects will be turned OFF. Hold the button for longer then a second and the Output will be Muted.
∙The Tuner works in both the Bypass and Mute modes.
4
