Lexicon MPX G2 manual Gate, The Effects and Parameters, 7-37, rameters are very important in this

The Effects and Parameters

Gate

					Gate is a reverb effect with a
				fairly constant sound and no de-
				cay until the reverb is cut off
				abruptly. This effect works well on
				percussion —particularly on snare
				and toms, but be sure to experi-
				ment with other sound sources as
				well.
					The Mix, P Dly and Rt HC pa-
Mix	0-100%	Dry/Wet ratio		rameters are very important in this
Level	Off, -89 to +6dB	Amount of effect in the processed signal		effect, allowing you to create any-
Time	140-700ms	Reverb time for mid and low frequency signals		thing from an enhancement or
Link	Off, On	Scales Spred with Size		subtle thickening, to a solid wall of
Diff	0-100%	Increase of initial echo density over time		reverb.
P Dly	0-250ms	Delay inserted before the onset of reverberation
LoSlp	-16 to +16	Determines low frequency envelope shape
HiSlp	-16 to +16	Determines mid and high frequency envelope shape
Xover	30Hz to 24.7kHz, Full	Frequency of transition from LoSlp to Slope
Rt HC	525Hz-24.7kHz, Flat	High frequency content of Slope
Shape	0-255	Contour of the reverberation envelope	0		190
Spred	0-255	Sustain of reverberation after initial build up
					NO PROCESSING STEPS USED

*= Interpolated; ( ) = Option of preceding parameter

7-37