Lexicon MPX G2 manual Clear Programs 251 to, Are you sure? Yes or No

System Controls

Press Store. The display query "Are you sure?" prompts you to select Yes or No as a response. If you don't want to perform the initialization, pressNo to cancel the operation. If you press the front panel Yes button in response to this message, the procedure will be performed immediately. The message Init Complete indicates that the procedure has been performed.

Note that the time for reinitialization will vary, with selections including DataBase reset taking more time.

The selections in this menu are as follows:

All: Resets all MPX G2 parameters to their original factory settings.

This will erase all User programs and Setups.

User pgms only: Erases all User programs (program #s 251-300).

System only: Resets all MPX G2 parameters except User programs.

Controllers: Resets the MPX G2 internal controllers (Knob, LFOs, etc.) to their default settings.

Bypass Patches: Removes any patches made between Bypass buttons and external controllers.

Global Patches: Clears all global patches.

DataBase: Resets DataBase assignments for all programs.

This will remove DataBase assignments from programs 251-300.

MPXG2/R1: Resets the MPX G2 and any connected MPX R1 to the original factory settings of all remote parameters such as Bypass Patches, Continu-

ous Controller assignments, etc.

This control allows you to clear a single User program, or any number of Clear Programs consecutively numbered User programs.

From the Clear Programs screen, press > to display the following screen.

Clear Programs 251 to 300

Two fields are available for selecting any num- ber of User programs between 251 and 300.

The Store button will flash. Pressing it

will display the following message ...

Are you sure?

Yes or No

Press Yes to clear the se- lected programs. Press No to cancel the operation.

5-13