Lexicon MPX G2 manual Stand Alone, Use with Programs

MPX G2 User Guide Lexicon

Stand Alone:

Direct connection to headphones, mixer or power amp

Use with

Programs 150-250

1.Turn the front panel Output control all the way down

2.Connect the Left and Right outputs to two input channels of your mixer or power amp

OR

Connect a pair of stereo headphones to the rear panel Phones jack

3.Connect your guitar to the MPX G2 front panel Guitar input

4.Set the MPX G2 front panel Input knob to 2 o’clock.

5.Select your guitar’s most powerful pickup, turn the guitar volume control up all the way and play your loudest.

6.Watch the Level and Clip LEDs above the MPX G2 Input/Output knob. If the red Clip LED comes on more than just occasionally during your very loudest playing, back off the Input knob a bit. (With some guitars, the red LED may never come on — that’s OK.) Now that you’ve got the Input knob set for your loudest playing, feel free to change the controls of your guitar to any settings you like as you audition the MPX G2.

7.While playing, slowly turn up the front panel Output knob until you reach a comfortable listening level. (You will hear a slight ticking as this knob is adjusted — this is normal.)

Now you’re ready to start listening to the Stand Alone programs (150-250).

Front Panel	Turn Output to a comfortable
	listening level.
	Turn Input to 2 o'clock.

Rear Panel

OR

to stereo headphones	to Left and Right inputs of a
	mixer or power amp

1-4