Lexicon MPX G2 manual Panner, Auto Pan

The Effects and Parameters

Panner

			The Panner effect has the left in-
			put panned to outputs with Pan 1,
			right input with Pan 2. Because all
			the parameters of this effect are
			interpolated, this can be used to
			add interpolated outputs to effects
			which have non-interpolated out-
			put levels.
Mix*	0-100%	Dry/Wet ratio
Level*	Off, -89 to +6dB	Amount of effect in the processed signal
Pan 1*	50L to C to 50R	Left input panner	25	190
Pan 2*	50L to C to 50R	Right input panner

Auto Pan

				Auto Pan is a version of Panner
				with the pans controlled by a local
				LFO. The left input is panned by
				the LFO’s sine output. The right
				input is panned by the cosine out-
				put, which is offset by	0°, 90°,
				180° or 270° by the Phase param-
				eter.
Mix*	0-100%	Dry/Wet ratio
Level*	Off, -89 to +6dB	Amount of effect in the processed signal
Rate*	0-50Hz or	Pan rate or period ratio
	1:24-24:1 cycles/beat
(Rate Units)		Selects frequency or cycles/beat
PW*	0-100%	Pan pulse width
Depth*	0-100%	Pan depth	25		190
Phase	0°-270°	Phase difference between right and left pan

*= Interpolated; ( ) = Option of preceding parameter

7-11