Lexicon MPX G2 manual Suspending and Clearing Patches, Multiple Patches with the Same Destination

Continuing to press > will step you to the Suspend option. Selecting Suspend temporaily suspends the patch until such time as you return to the Patch System Destination Option and select Unsuspend.

Continuing to press > will step you to the options: Clear 1-5, and Clear All. These allow you to select any or all patches to be cleared.

Once you have made any selection, press Options to have your choice take effect and to return to the Source and Destination Assignment screen.

If you create two or more patches with the same Destination, the Destination value will be the sum of all patches assigned to it.

For example, if a Footpedal, and the knob are both assigned to Mstr Mix, the Mix value will be the sum of the patch Destination values for those two patches. When creating multiple patches to the same Destination, you should set the individual Destinations to values which, when added together, are less than or equal to the maximum value for each parameter. The Footpedal and the knob, for example, could each have a maximum value of 50%, or they could be assigned values of 25% and 75%, 60% and 40%, etc.

When the sum of multiple patched parameter Destination values is greater than the maximum value of the parameter, the parameter value will remain at maximum until the sum of the patches falls below it.

Patching

Suspending and

Clearing Patches

Multiple Patches with the Same Destination

4-7