Lexicon MPX G2 manual Initialize All, Options: Unchanged, Start at n, and Clear chain

MPX G2 User Guide Lexicon

Press Options to access Start at n, which allows you to quickly

configure any 10 consecutively numbered programs as a Chain, and Clear Chain, which removes all assignments from the active Chain.

Options: Unchanged, Start at n, and Clear chain

Press Options from any of the Chain screens to access an additional set of controls which allow you to quickly alter chain assignments.

Unchanged: Selections made in Options take effect immediately on returning to the Chain menu. This selection allows you to enter and exit Options without effecting any change.

Start at n: This control allows you to completely reassign a chain, starting with the program number selected here, and in- cluding the next consecutive nine program numbers. This is particularly useful for creating chains from your own programs.

Clear Chain: This control allows you to completely clear all assignments for the active chain.

Initialize Selecting any item in the Initialize menu will restore portions of the MPX G2 to their factory default settings. These controls allow you to perform a complete reset of the unit to its factory defaults, or to reset only selected functions.

For any displayed selection, the initialization procedure is the same. When a selection is displayed, as in the Initialize All example shown below, the Store button LED will flash, indicating that the MPX G2 is armed to perform the reset procedure.

Initialize

All

Select the initialization option you want.

The Store button will flash. Pressing it

will display the following message ...

Are you sure?

Yes or No

Press Yes to initialize. Press

No to cancel the operation.

5-12