Lexicon MPX G2 manual Test Tone, Click

MPX G2 User Guide Lexicon

Test Tone

Test Tone is an audio sine wave generator with its output quantized to correspond with the pitches of a chromatic scale (A = 440 Hz) over

anine-and-one-half octave range. It is provided primarily as a conve- nient way of generating test tones and tuning references.

Bal controls the relative level of left and right output attenuation. When Bal=-50, the left output has no attenuation, and the right out- put is fully attenuated. When Bal=0, neither output is attenu- ated. When Bal=+50, the left out- put is fully attenuated and the right output has no attenuation. Level and Bal can be patched to a global LFO to get tone bursts, etc. Pitch accuracy is better than 1/4 cent.

Mix	0-100%	Dry/Wet ratio
Level*	Off, -89 to +6dB	Amount of effect in the processed signal
Note	C0-G10	Sine wave pitch, expressed as MIDI notes
		(0=C0, 127=G10)
Bal*	-50 to +50	Relative level of left and right output attenuation

Handy pitches:

D#0=19.445Hz A4=440Hz B5=987.77Hz D#8=4978Hz D#9=9956Hz

33 190

Click

	This effect is a simple metro-
nome which is automatically con-
nected to Tap. Press Tap twice to
set the tempo.
	This effect can be used as an
inputsource forauditioning reverbs
and delays. It is also a convenient
timing reference for the JamMan
effect, where the click is automati-
cally muted until the loop is tapped.		Mix	0-100%	Dry/Click ratio
		Level	0ff, -89dB to +6dB	Amount of Click in processsed signal
14	190

*= Interpolated; ( ) = Option of preceding parameter

7-20