Lexicon MPX G2 manual Volume M, Volume S and Volume D, PedalVol and ExtPedalVol

MPX G2 User GuideLexicon

Volume (M), Volume (S) and Volume (D)

	The Volume effects can be			Volume (M)	Volume (S)
placed in front of, or behind, other
effect blocks to provide smooth
level control through a 95dB
range. You can use them for dy-
namic input or output control, EQ
input trim (helpful when adding
large amounts of gain with an EQ
effect), stereo to mono mixer,					Volume (D)
cross fade controls, volume pedal,
etc.
	In Volume(M) the left and right
inputs are mixed together, then
sent to both outputs through a vol-
ume control.
	In Volume (S) the left and right
inputs are sent through a ganged
pair of		volume controls.
	In Volume (D) the left and right
inputs are sent through indepen-
			Mix	0-100%	Dry/Wet ratio
dent volume controls.
			Level*	Off, -89 to +6dB	Amount of effect in the processed signal
17		190	Vol*	0-100%	Amount of effect in the processed signal
Voume (M)
13		190
Volume (S)
18		190

Voume (D)

PedalVol and ExtPedalVol

PedalVol is the same as Vol- ume (S), except the Vol parameter is hardwired to the Foot Pedal in- put on the MPX G2. When using the MPX R1 MIDI Remote Con- troller, this parameter is automati- cally connected to the R1’s built-in pedal. This means that no patch- ing is required to create a volume pedal effect.

ExtPedalVol is hardwired to the External Pedal input of the MPX R1, allowing you to easily create programs with both a Volume and Wah pedal available simulta- neously.

13 190

Mix	0-100%	Dry/Wet ratio
Level*	0ff, -89dB to +6dB	Amount of effect in processsed signal

PedalVol and ExtPedalVol * = Interpolated; ( ) = Option of preceding parameter

7-28