Lexicon MPX G2 manual Changing the Range of the Destination Parameter, Ctls, < > Dst, RvbDecay

For most applications, the default full-range Destination values are all you will want, as these allow your selected Source to exert direct control over the full range of parameter values. In other cases, you may want to adjust the Destination values to a more limited range, or establish a nonlinear relationship between the controller and the parameter values.

With a Destination assigned, and the Destination field selected, press > to display the first of two Patch Value screens where you can set Min and Max limits for the selected parameter. With Max selected, press > again to display a Mid Point selection screen where you can set a pivot point within the Destination parameter range to allow nonlinear control. (Note, that a Mid point must be assigned to the Source range, before a Destination Mid point is recognized. See Page 4-3.)

Patching

Changing the Range of

the Destination

Parameter

With the Destination assignment field selected, press > to display the Destination value screen.

Src:	Ctls	A/B
< > Dst:	RvbDecay

Min < > 0.14s

Max

26.2s

Use the < and > buttons to select the parameter value fields. Use the knob to adjust the value within the selected field.

With the rightmost field selected, press > again to access the Mid Point selection screen.

Mid

<0.975

Press < to step back to the previous screen.

Use the knob to enter a Mid Point value.

4-5