Sony STR-DH550, STR-FH750 Checking Auto Calibration results, When error code appears, Help Guide

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH750/STR-DH550

Checking Auto Calibration results

To check error codes or warning messages received in [Auto Calibration], proceed with the following steps:

1.Select [WRN Check].

If a warning message appears, check the message and use the receiver without change. Or if necessary, perform Auto Calibration again.

For details on the warning messages, see “List of messages after Auto Calibration measurements.”

When error code appears

Check the error and perform Auto Calibration again.

Hint

The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems.

Related Topic

List of messages after Auto Calibration measurements

Notes on use

4-488-933-11(1)

Copyright 2014 Sony Corporation

235