Sony STR-FH750 manual The Control for HDMI function does not work, Help Guide, STR-DH750/STR-DH550

Help Guide

MULTI CHANNEL AV RECEIVER

STR-DH750/STR-DH550

The Control for HDMI function does not work.

Check the HDMI connection.

Make sure [Control for HDMI] is set to [On] in the HDMI Settings menu. Make sure the connected device supports the Control for HDMI function.

Check the Control for HDMI settings on the connected device. Refer to the operating instructions of the connected device.

If you unplug the HDMI cable or change the connection, repeat the procedures of “Preparing for “BRAVIA” Sync.”

When [Control for HDMI] is set to [Off], “BRAVIA” Sync does not work properly, even if the device is connected to the HDMI IN jack.

The types and number of devices that can be controlled by the “BRAVIA” Sync feature are restricted by the HDMI CEC standard as follows:

Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices

Playback devices (Blu-ray Disc players, DVD players, etc.): up to 3 devices

Tuner-related devices: up to 4 devices (the receiver uses one of them for its OSD operations.)

AV receivers (audio systems): up to 1 device

Notes on use

4-488-933-11(1)

Copyright 2014 Sony Corporation

204