TROUBLESHOOTING GUIDE
SYMPTOM
No power.
The remote does not function.
TV
Bad Picture (snow,
multipe images, distortion, blurry)
Black and white picture.
No picture or sound.
Colored patches of picture.
CAUSE (AND REMEDY)
•Check that the AC power cord is connected.
•The unit is not turned on.
•Remove any obstacles between the remote and the unit.
•Use the remote near the unit.
•Point the remote at the remote sensor on the unit.
•Replace the batteries in the remote with new ones.
•Check the location of the antenna and adjust it if necessary.
•Make sure the antenna cable is firmly connected.
•Make sure all input cables are firmly connected.
•Check the PICTURE MENU within the TV SETUP MENU.
•Check to make sure the program you are watching is broadcast in Color and not Black & White.
•Make sure the unit is plugged in and turned on.
•Make sure TV mode is selected.
•Try a new channel to check for possible station trouble.
•Make sure the antenna is connected properly.
•Increase the volume.
•Make sure the antenna or audio video source device is working properly.
•Make sure all cables are firmly connected.
•Check for local interference.
•Make sure there are no unshielded electrical devices nearby that are causing interference.
•Turn off the unit for 30 minutes, then try again.
Specifications and appearance are subject to change without notice.
MAINTENANCE
Cleaning the unit
•Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
•Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak
•Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.
GB - 14
PLV76198S23E10 IB ENG.indd 14
9/8/2009 9:57:26 AM
