Samsung VP-DC171WB/XEF manual Setting the Custom White Balance,  The Set White Balance will blink

DVD Camcorder: Advanced Recording

Setting the Custom White Balance

You can adjust the white balance as you wish based on the recording environment.

1.	Set the [Mode] switch to [DISC] or [CARD].		6
	(VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
2.	Set the [Power] switch to [	(Camera)].

3.Press the [MENU] button.

The menu list will appear.

4.Move the [Joystick] up or down to select <Camera>, then press the [Joystick].

5.Move the [Joystick] up or down to select <White Balance>, then press the [Joystick].

6.Move the [Joystick] up or down to select <Custom WB>, then press the [Joystick].

The <Set White Balance> will blink.

7.Place the subject under the desired lighting, then press the [Joystick].

The <Set White Balance> will disappear and the white balance setting will commence.

8. To exit, press the [MENU] button.	8
 Custom WB icon ( ) is displayed.

Notes

You can directly access the White Balance function by using the [Q.MENU] button. page 27

The White Balance function will not operate in EASY.Q mode.

Turn the Digital Zoom off (if necessary) to set a more accurate white balance.

Reset the white balance if lighting conditions change.

During normal outdoor recording, setting to Auto may provide better results.

ENGLISH

Camera Mode
►Camera
Program AE		A
White Balance	Auto
Digital Effect	Indoor
Shutter	Outdoor
Exposure	Custom WB
16:9 Wide	▼
Move OK Select MENU Exit

Set White Balance

OK Select	MENU Exit
STBY SP	0:00:00	-RW
	30 min	VR
16:9 Wide

57