Nilfisk-ALTO 3.4 user manual PRESET Modifications MA 1 3 B 2 4 S

4.8 PRESET Modifications

M A 1 3 B 2 4 S 5 6

2 U 2 x 2 W + 2 M A X

This indicates that the value of one or more parameters has been temporarily modified with respect to the stored in the PRESET shown.

Practically speaking, this indication means that the changes made to the PRESET have not been stored.

Note: once it has been enabled, the indication remains even if the "original" values are reset manually.

The indication disappears as soon as the PRESET is saved or as soon as a new PRESET is loaded (includ- ing this same PRESET).

In other words, the indication disappears as soon as stored values are accessed.

If the PRESET isn't saved, temporary changes are lost as soon as a new PRESET is loaded (including this same PRESET).

Note: temporary changes are kept on the other hand in the "buffer memory": when the unit is switched on, the system maintains exactly the same settings as when the unit was switched off, including temporary changes.

4.9.System Protection

T			A	1	3		B	2	4		S	5	6
	2	U	2	x	2	W	+	2		A	X

P A 1 3 B 2 4 S 5 6

2 U 2 x 2 W + 2 M A X

These indications appear when the LOCK function (UTILITY menu) is enabled, i.e. when the system is totally (T) or partially (P) protected against accidental or unauthorized changes (even if temporary).

Protection is ensured by a password, without which editing procedure can't be unlocked.

IMPORTANT! If you can't remember the password, there is an easy way for you to unlock the protection. Turn the unit on, and almost "at the same time", press "PREV" and " " keys. Now, the protection is unlocked.

5.THE MENU MAP CONFIGURATION DESCRIPTION

The control software is organized in PRESET, DELAY, EDIT and UTILITY menus, each of which contains the relative types of parameters and functions.

5.1.Preset Menu

menu

PRESET

Load Preset

Store Preset

Dump Out Preset

Incoming Dump

10