ADVANCED SETUP
■ADVANCED SETUP menu parameters
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Factory presets PRESET
Use to reset all parameters to the factory presets. Choices: CANCEL, RESET
•Select CANCEL if you do not want the parameters of this unit to be initialized when you reset the factory presets.
•Select RESET if you want all of the parameters of this unit to be initialized when you reset the factory presets.
Notes
•This setting does not affect the parameters in the ADVANCED SETUP menu.
•The resetting process starts next time you turn on the power of this unit.
Tuner TU
(Asia and General models only)
Use to switch the frequency step selection according to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
•North, Central and South America: AM10/FM100 (kHz)
•Other areas: AM9/FM50 (kHz)
Changing the ADVANCED SETUP menu parameters
The ADVANCED SETUP menu is displayed in the front panel display.
y
•During the ADVANCED SETUP procedure, audio output is muted.
•During the ADVANCED SETUP procedure, only STANDBY/ON, A/B/C/D/E and the preset station number buttons (1 and 2) on the front panel are operational.
CAUTION
Be sure to set the speaker impedance before using this unit to play back audio signals (see page 13).
FM/AM | l TUNING h |
|
| PURE DIRECT | TAPE MONITOR |
EDIT | MEMORY TUNING MODE |
|
|
|
|
|
|
|
|
|
|
|
| 16 |
A/B/C/D/E | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | VOLUME | 20 | 12 |
|
|
|
|
|
|
|
|
|
| 26 | 8 |
INPUT |
| BASS |
| TREBLE |
| BALANCE |
| LOUDNESS |
|
|
|
PHONES | SPEAKERS |
|
|
|
|
|
|
| 40 |
| 4 |
STANDBY |
|
|
|
|
|
|
|
|
| 60 | 2 |
/ON |
|
|
|
|
|
|
|
|
|
∞0
1,2,5 2,4 3
1Press STANDBY/ON on the front panel to set this unit to the standby mode.
STANDBY
/ON
2Press and hold A/B/C/D/E on the front panel and then press STANDBY/ON.
This unit is turned on, and the ADVANCED SETUP menu appears in the front panel display.
A/B/C/D/E | While holding down, |
|
| press | /ON |
|
| STANDBY |
OPERATION
25
