Chapter 6 | CLI – Layer 2 |
|
|
show snmp retries
Use the show snmp retries command to display the number of retries initiated by the Device Manager application when it tries to send SNMP messages to the device.
The syntax for this command is:
show snmp retries
Output Example:
show snmp timeout
Use the show snmp timeout command to display the default SNMP timeout in seconds. This command is useful for access using the Device Manager.
The syntax for this command is:
show snmp timeout
Output Example:
show timeout
Use the show timeout command to display the amount of time the CLI can remain idle before timing out in minutes. If the result is 0, there is no timeout limit. The default is 15 minutes.
The syntax for this command is:
show timeout
Output Example:
CLI timeout is 10 minutes
show logout
Use the show logout command to display the amount of time the CLI can remain idle before timing out in minutes. If the result is 0, there is no timeout limit. The default is 15 minutes.
48 | Avaya P332MF User’s Guide |
