Avaya P332MF manual Reset stack

Chapter 6 CLI – Layer 2

reset

Use the reset command to restart the system or an individual switch. If no switch number is defined or the switch number of the Master is defined, the command resets the entire system. If the switch number is defined, the command resets the specified switch only.

Note: You should perform a reset after downloading software to the switch.

The syntax for this command is:

reset {module number}

Output Example:

To reset the Master agent and force the entire system to reset:

P330-N# reset

This command will force a switch-over to the master module and disconnect your telnet session.

Do you want to continue (y/n) [n]? y

Connection closed by foreign host.

Output Example:

To reset switch 4:

P330-N# reset 4

This command will reset module 4 and may disconnect your telnet session.

Do you want to continue (y/n) [n]? y

Resetting module 4...

reset stack

Use the reset stack command to perform a hardware reset in the entire stack.

The syntax for this command is:

reset stack

124 Avaya P332MF User’s Guide