Chapter 6 | CLI – Layer 2 |
|
|
show rmon history
Use the show rmon history command to show the most recent RMON history log for a given History Index. The history index is defined using the rmon history command on Page 126 or using an RMON management tool.
The syntax for this command is:
show rmon history [<History Index>]
Entry 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 30 seconds
Requested # of time intervals, ie buckets, is 20
Granted # of time intervals, ie buckets, is 20
Sample # 1 began measuring at 2:53:9
Received 62545 octets, 642 packets,
391 broadcast and 145 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
#of dropped packet events (due to a lack of resources): 0 Network utilization is estimated at 0
show rmon alarm
Use the show rmon alarm command to show the parameters set for a specific alarm entry that was set using the rmon alarm command on Page 127 or using the P330 Device Manager.
The syntax for this command is:
show rmon alarm [<Alarm Index>]
Output Example:
alarm 1026 is active, owned by amir Monitors ifEntry.1.1026 every 60 seconds Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054
Falling threshold is 10, assigned to event # 1054
On startup enable rising or_falling alarms
Avaya P332MF User’s Guide | 71 |
