Chapter 6 | CLI – Layer 2 |
|
|
show cam
Use the show cam commands to display the CAM table entries for a specific port.
Note: MACs associated with LAGs appear under the LAG ID, not under the LAG port.
The syntax for this command is:
show cam [mac
Output Example:
P330-N> show cam 1/1
Dest MAC/Route Dest | Destination Ports |
1/1 | |
1/1 | |
1/1 | |
etc... |
|
Output Example:
P330-N> show cam mac 00-40-0d-88-06-c8
Dest MAC/Route Dest Destination Ports
Total Matching CAM Entries Displayed = 1
show cascading fault-monitoring
Use the show cascading
The syntax for this command is:
show cascading fault-monitoring [<mod_num>]
Output Example:
Module 1
Module 1
62 | Avaya P332MF User’s Guide |
