Avaya P332MF Set allowed managers enableddisabled, Set allowed managers IP, Set psu type

Chapter 6 CLI – Layer 2

Note: If you wish to define a string which includes spaces, you must enclose the entire string in quotation marks, e.g. "new york".

set allowed managers

Use the set allowed managers command toenable/disable the Allowed Managers feature. When this feature is enabled, only those stations whose IP addresses are listed in the Allowed Managers table can access the device over Telnet, SNMP, or HTTP.

The syntax for this command is:

set allowed managers [enableddisabled]

Output Example:

P330-N> set allowed managers enabled

Managers are enabled

set allowed managers IP

Use the set allowed managers IP command to add or remove an IP address from the Allowed Managers table. The Allowed Managers table can contain up to twenty IP addresses.

The syntax for this command is:

set allowed managers ip [adddelete][IP address]

Output Example:

P330-N> P330-1(super)# set allowed managers ip add 149.49.32.134

Ip was added to the table

set psu type

Use the set psu type command to set the main power supply type (AC/DC) of the module.

Note: This command is not applicable to P332G-ML and P332GT-ML switches. This command is used to set the power supply types for other P330 switches in the stack.

122 Avaya P332MF User’s Guide