Avaya P332MF manual Set security mode, Set arp-aging-interval value, Set arp-tx-interval

Chapter 6 CLI – Layer 2

The syntax for this command is:

set secure mac <mac-address> port <mod-num>/<port-num>

set security mode

Use the set security mode command to enable or disable MAC security at the stack level. When enabled, the ports are secured based on their individual configuration. When disabled, all the ports in a stack are non-secured.

The syntax for this command is:

set security mode { enable disable }

Output Example:

P330-N> set security mode enable

Security mode enabled.

set arp-aging-interval

Use this command to set the ARP table aging interval for gateways’ entries in the agent ARP table. The MAC value for the default gateway of ML agent in the ARP table, is deleted at the end of every aging interval. The default value is 10 minutes.

The syntax for this command is:

set arp-aging-interval <value>

value The number representing the interval, from 0-10 minutes.

Example:

P330-N# set arp-aging-interval 20

ARP aging interval was set to 20 minutes.

set arp-tx-interval

Use the set arp-tx-interval command to set the keep-alive frames sending interval. Setting the interval to 0 disables the transmission of the keep-alive frames.

The syntax for this command is:

set arp-tx-interval <value>

value The interval, in seconds.

120 Avaya P332MF User’s Guide