Chapter 6 | CLI – Layer 2 |
|
|
name | Channel name |
Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".
Output Example:
Port 1/1 channel mode set to on
Port 1/2 was added to channel
Port 1/3 was added to channel
set port classification
Use the set port classification command to set the port classification to either regular or valuable. Any change in the Spanning Tree state from Forwarding for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port] {regular valuable}
module port | switch/port range |
regular valuable | port classification |
Output Example:
Port 2/19 classification has been changed.
Avaya P332MF User’s Guide | 105 |