Sun Microsystems 2.1 Error Messages, Server Console Messages, Unable to create title on the MFS

Models: 2.1

1 184
Download 184 pages 37.97 Kb
Page 142
Image 142

Unable to create title on the MFS.

Likely cause: A filled MFS or a disk failure. In this situation, the Sun MediaCenter software removes all files associated with the title.

Use mfs df, documented in the Sun MediaCenter Server Service Manual, to determine free space in the MFS. Use mfs repair -s, documented in the same Service Manual, to determine whether a disk has failed.

If you use SunNet Manager, see if you have received the Disk_Failure trap. Follow the procedure in Chapter 8 “Administering MFS Disks,” to replace the defective disk.

10.2Error Messages

The numbers that appear in each error message listed below are examples only.

10.2.1Server Console Messages

WARNING: data disk 0x80009a (32,154) FAILED

Cause: an MFS data disk has failed. The server switches into parity mode.

Action required: Replace the failed disk, per the procedure described in

Chapter 8.

WARNING: vod_add_stream: failed ba@466,1,8060@

Cause: Attempt to add a new video stream, which would exceed the output network bandwidth supported by the Sun MediaCenter server.

Action required: Discontinue attempts to add more streams until one or more streams is finished.

WARNING: stream id 96 (ba@325,0,8060@): Deadline Missed

Cause: A disk read operation cannot keep up with the Sun MediaCenter server. Message can be accompanied by short (less than one second) interruptions in the video for affected streams.

Action required: Occasional missed deadlines are not a concern. If you have several in an hour and these are accompanied by interruptions in video display, contact your Sun service representative.

10-4Sun MediaCenter Server Administrator’s Guide • December 1997

Page 142
Image 142
Sun Microsystems 2.1 manual Error Messages, Server Console Messages, Unable to create title on the MFS