Chapter 6 | CLI – Layer 2 |
|
|
The syntax for this command is:
nvram initialize [switchall]
switch | Resets all the switching level parameters (Layer 2 only) throughout |
| the stack |
all | Resets all parameters including licenses and routing parameters of |
| the Layer 3 switches present in the stack |
Output Example:
This command will force a factory default and
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.
host%
rmon history
Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval <interval> buckets <number of buckets> owner <owner name>
history_index | This is the history index number of this entry (it is advisable to |
| use the same interface number as your history index number). |
module/port | The switch number/the port number. |
interval | The interval between 2 samples. |
number of | The number of buckets defined. |
buckets |
|
owner name | The owner name string. |
Output Example:
history 1026 was created successfully
126 | Avaya P332MF User’s Guide |