Chapter 6 | CLI – Layer 2 |
|
|
show port classification
Use the show port classification command to display a port’s classification.
The syntax for this command is:
show port classification [module/[port]
module/portThe switch number/the port number
Output Example:
Port | Port Classification |
1/1 | regular |
1/2 | regular |
1/3 | regular |
1/4 | regular |
1/5 | regular |
1/6 | regular |
1/7 | regular |
etc... |
|
show port redundancy
Use the show port redundancy command to display information about all redundancy schemes defined for this stack.
The syntax for this command is:
show port redundancy
Output Example:
P330-N> show port redundancy
Redundancy Name | Primary Port | Secondary | Port | Status |
uplink | 1/7 | 2/12 |
| enable |
52 | Avaya P332MF User’s Guide |
