Avaya P332MF manual Set radius authentication retry time time

Chapter 6 CLI – Layer 2

set radius authentication retry-time

Use the set radius authentication retry-timecommand to set the time to wait before re-sending an access request.

The syntax for this command is:

set radius authentication retry time <time>

time Retry time in seconds

set radius authentication retry-number

Use the set radius authentication retry-numbercommand to set the number of times an access request is sent when there is no response.

The syntax for this command is:

set radius authentication retry number <number>

number Retry number

set radius authentication udp-port

Use the set radius authentication udp-portcommand to set the RFC 2138 approved UDP port number. Normally, the UDP port number should be set to its default value of 1812. Some early implementations of the RADIUS server used port number 1645.

The syntax for this command is:

set radius authentication server udp-port <number>

134 Avaya P332MF User’s Guide