Avaya P332MF manual Show port security module/port

Chapter 6 CLI – Layer 2

Output Example:

P330-N> show port vlan-binding-mode port 1/1 is statically bound

port 1/2 is statically bound port 1/3 is statically bound port 1/4 is statically bound port 1/5 is statically bound port 1/6 is statically bound port 1/7 is statically bound port 1/8 is statically bound port 1/9 is statically bound port 1/10 is statically bound

show port security

Use the show port security command to list the security mode of the ports of a switch or stack. When no port number is specified, this command displays all the secured ports in the stack.

The syntax for this command is:

show port security [<module>[/<port>]]

Example:

P330-N> show port security 1 Port 1/1 port security disabled. Port 1/2 port security disabled. Port 1/3 port security disabled. Port 1/4 port security disabled. Port 1/5 port security disabled. etc.

Note: Port security for the P330-ML switches will always have the value unknown. This command is used to display the security status for the other P330 switches in the stack.

54 Avaya P332MF User’s Guide