Samsung Digimax U-CA PictBridge Picture Printing, Information, Fatal error, Recoverable error

PictBridge: Picture Printing

Printing Pictures

1.Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58)

2.The [PICTBRIDGE] menu will appear.

3.Use the UP and DOWN buttons to select the [PRINT] menu, and then press the OK button.

PICTBRIDGE

IMAGES	00 PRINTS
SETUP	CUSTOM
PRINT
MOVE:	SET:OK

4. The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. If you press the SHUTTER button during printing, printing will be cancel and the menu from Step 2 will appear.

STOP:SHUTTER

5. If an error occurs during printing, the screen shown below will appear.

CHECK PAPER

SET:OK

WARNING RESUME CANCEL OK: CONFIRM

[ Fatal error ]

Press the OK button to cancel printing. Follow the Steps 1 to 4 again to print the picture(s).

[ Recoverable error ]

Select the submenu values by pressing the UP/DOWN button and then press the OK button.

If [RESUME] is selected: continues printing.

If [CANCEL] is selected: cancels printing.

INFORMATION

When printing pictures by connecting the camera to the printer, use the AC adapter.

If the printer is turned off during printing, the printing will stop and the paper will be dispelled. If there are continuous print error, please check the print condition.

61