Samsung Digimax U-CA Metering, Effect, Information, will be biased towards the centre of the

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. This can be set in Auto and Manual modes.

MULTI(		)	: Exposure will be calculated based on an
			average of the available light in the
			image area. However, the calculation	METERING
			will be biased towards the centre of the
				MULTI
			image area. This is suitable for general
			use.	SPOT
SPOT(	)		: Only the rectangular area in the center

of the LCD monitor will be metered for

light. This is suitable when the subject in the center is exposed correctly, regardless of the back lighting.

INFORMATION

The default metering mode is Multi pattern metering.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, rather use exposure compensation.

Effect

By using the camera’s digital processor, it is possible to add special effects to your images. You can select from AUTO, MANUAL, and Movie Clip modes. The value you set will remain unchanged until the camera is turned off.

EFFECT

NORMAL

B & W

SUNSET

SEPIA

EFFECT

NORMAL

B & W

SUNSET

SEPIA

	[ STILL IMAGE mode ]	[ MOVIE CLIP mode ]
NORMAL : No effect is added to the image.
B & W	: Converts the image to black and white.
SUNSET : Used for capturing images at sunset
SEPIA	: Captured images will be stored in a sepia tone (a gradient of yellowish brown colours).
RGB	: Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images
	to be captured.

40