Samsung Digimax U-CA user manual Quick view, Cancel Okconfirm

Quick view

If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images.

Setting Quick View
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.			SETUP
		LCD
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN		VIDEO		OFF
button and press the RIGHT button.		Q.VIEW
4. Select a desired sub menu by pressing the UP/ DOWN		BACK:			SET:OK
button and press the OK button.
[OFF]	: The quick view function can’t be activated.

[1 ~ 5 SEC] : The captured image is briefly displayed during the selected time.

5. Press the menu button twice and the menu will disappear.

Deleting Images in Quick View

You can delete images directly from the quick view screen. If you select the [1~5SEC] sub menu at step 4, press the RIGHT button and the [DEL. ANS.] menu will be displayed.

5.Select the desired [DEL. ANS.] sub menu by pressing the UP/DOWN button and press the OK button.

Selecting [OFF] : A [DELETE?] message will not display.

Selecting [ON] : You can delete the captured image at once.

6. Press the menu button twice and the menu will disappear.

	SETUP
LCD	DEL.ANS.
VIDEO	ON
Q.VIEW	OFF
BACK:	SET:OK

Using the [DEL.ANS.] menu

If you select [ON] at the [DEL.ANS.] menu, a message as shown alongside will be displayed after taking a picture. If [DELETE] is selected: press the OK button, and the

recorded pictures are deleted. If [CANCEL] is selected: press the OK button, and the recorded pictures are saved.

DELETE? DELETE

CANCEL OK:CONFIRM

71