Samsung Digimax U-CA user manual Avatar, MyCAM

Avatar

Storing Avatars for the Startup Image and Selecting One as the Startup Image

1.In a mode other than Voice Recording mode, press the MENU button.

2.Use the LEFT and RIGHT buttons to select the [MYCAM] menu tab.

3.Select [AVATAR] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

If [OFF] is selected : The avatar will not be used as the startup image during power-on.

If [CHANGE] is selected: Avatars will be displayed in thumbnail format.

Use the UP, DOWN, LEFT, and RIGHT buttons to select the desired avatar, and then press the OK button.

The avatar playback screen will appear.

5.Press the PLAY/PAUSE button ( ) to play back the avatar. Use the LEFT and RIGHT buttons to select the previous or next avatar file.

6.Press the OK button to accept the selected avatar and to register it as the startup image.

Storing Playable Avatars

1.Connect the camera to your PC. (See page 109.)

2.Open Windows Explorer, select the folder in which your avatars are located (C:\My Avatar), and then select avatar(s) for playback (SUCAxxxx.mov).

3.Right-click on the avatar and select [Copy].

4.Select the DCIM\100SSCAM folder in the removable drive.

5.Right-click on the removable drive and select [Paste] to copy the avatar(s) to the memory card.

	MyCAM
AVATAR	OFF
S.IMAGE	CHANGE
S.SOUND
BACK:	SET:OK

AVATAR 1

PLAY

MOVE:SET:OK

74