Samsung Digimax U-CA PictBridge Picture Selection, the printer.See p.58, currently displayed

PictBridge: Picture Selection

You can select the scope of the PictBridge function.

1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)		PICTBRIDGE
2. The [PICTBRIDGE] menu will appear.		IMAGES	ONE PIC
3. Use the UP and DOWN buttons to select [IMAGES], and		SETUP	ALL PICS
then press the RIGHT button.		PRINT
4. Use the UP and DOWN buttons to select the desired		BACK:	SET:OK
submenu value, and then press the OK button.
When [ONE PIC] is selected	: The PictBridge function will be applied only to the picture
	currently displayed.
When [ALL PICS] is selected	: The PictBridge function will be applied to all pictures,
	excluding movie clips and voice files.

Setting the Number of Copies to Print

-Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print will appear as shown below.

01 PRINTS

EXIT:SH1

MOVE PIC: SET:OK

[ When [ONE PIC] is selected ]

01 PRINTS

EXIT:SH1

MOVE PIC: SET:OK

[ When [ALL PICS] is selected ]

-Use the UP and DOWN buttons to select the number of copies to print and then press the OK button. The number of copies you wish to make: 30

Unless you press the OK button, the changed number of prints will not be applied.

-When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to the previous or next picture.

-Press the SHUTTER button to return to the PictBridge menu.

59