Samsung Digimax U-CA Using the camera buttons to adjust the camera, POWER button, SHUTTER button

Using the camera buttons to adjust the camera

The RECORDING(STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode function can be set up by using the camera buttons.

POWER button

Used for turning the camera’s power on / off.

If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life. Pressing the power button for over 3 seconds will deactivate the buzzer sound function.

SHUTTER button

Used for taking an image or recording voice in the

RECORDING (STILL IMAGE, VOICE RECORDING, MOVIE CLIP) mode.

In MOVIE CLIP mode : Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again.

In STILL IMAGE mode

Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter down fully takes the image and stores the relevant data regarding the shot. If you select voice memo recording, the recording will start after the camera has finished storing the image data.

WIDE / TELE button

If the menu is displayed in Still Image mode, pressing the

WIDE(W)/TELE(T) button will skip 5 menu tabs at a time.

If the menu is not displayed, this button works as the

OPTICAL ZOOM or DIGITAL ZOOM button.

This camera has a 3X optical zoom and a 3X digital zoom function. Using both will offer a total zoom ratio of 9X.

24