Samsung Digimax U-CA user manual Before contacting a service center, Please check the following

Before contacting a service center

Please check the following

Symptom	Causes	Remedy
	- There is low battery capacity	- Insert fresh batteries
The camera doesn t	- An AC Power Adapter is not	- Connect an AC Power Adapter
	connected
switch on
	- Batteries are inserted incorrectly	- Insert the batteries according to the polarity
	with the reverse polarities.	marks (+, -).
	- The batteries are exhausted	- Insert fresh batteries
The camera power	- The Camera is turned off	- Slide the power switch to reactivate camera
	automatically.
ceases whilst in use
	- The Adapter plug is not	- Remove and re-insert the plug
	connected securely
	- The Camera is being used in	- Keep the camera in warm conditions
Batteries drain quickly	low temperatures	(i.e. inside a coat or jacket) and only remove it
		in order to take images
	- The memory card is not	- After turning the camera off, insert a new
	inserted	memory card
	- There is insufficient memory capacity	- Delete unnecessary image files
	- Thememorycardhasnotbeenformatted	- Format the memory card (p.66)
Camera does not	- The memory card is exhausted	- Insert a new memory card
take images when	- The camera’s power is off	- Turn the camera power on
pressing the Shutter
	- The batteries are exhausted	- Insert fresh batteries
button
	- The memory card is locked	- Slide the write protect switch to the bottom of
		the memory card
	- Batteries are inserted	- Insert the batteries according to the polarity
	incorrectly with the reverse	marks (+, -).
	polarities.
The camera suddenly	- The camera was stopped due	- Press the power button for longer than 3
stops working while in	to a malfunction.	seconds. The camera will restart to its normal
use.		operation state.

86