Samsung Digimax U-CA user manual Starting recording mode, Information, Standby Start.Shutter

Starting recording mode

Recording Voice

Steps from 1-4 are the same as those for recording a movie clip.

5.Select the VOICE RECORDING( ) mode by sliding the mode switch.

6.Press the shutter button to record a voice.

-Press the shutter button once and voice is recorded for as long as the available recording time(Max : 1 hour) allows. The recording time will be displayed on the LCD monitor.

-Voice will still be recorded if the shutter button is released.

-If you wish to stop recording, press the shutter button again.

-File type : *.wav

STANDBY

START.SHUTTER

[ VOICE RECORDING mode ]

INFORMATION

A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Recording a still image

Steps from 1-4 are the same as those for recording a movie clip.

5.Select the STILL IMAGE( ) mode by sliding the mode switch.

6.Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor.

7. Press the shutter button to capture an image.

A [DELETE?] message may be displayed after taking a picture. Refer to p.49 for more information about this [DEL. ANSWER].

[ STILL IMAGE mode ]

INFORMATION

Manner mode: Pressing the power button for more than 3 seconds changes the buzzer and start-up sound setting to OFF, even though you may have set these to ON.

To turn on the startup sound and operation sound, set the startup sound (MyCAM mode) and operation sound (Setup mode) to a submenu other than [OFF].

22