Samsung Digimax U-CA Connecting to a Power Source, Removing the battery, Using the batteries

Connecting to a Power Source

Using the batteries	: If the camera does not turn on after you have inserted batteries, please
	check whether the batteries are inserted with the polarity(+ and-).

1. Open the battery chamber	2. Insert the batteries according
cover by pushing in the	to the polarity marks (+ and -)
direction of the arrow.	on the back of the battery
	chamber cover.

3.To close the battery chamber cover, push it until it clicks.

Removing the battery

1. Turn off the camera power. Open the battery chamber cover and move the battery holder aside. The battery will be released.

2. Take out the battery and close the battery chamber cover.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery indicator
	The batteries are fully	There is no battery
Battery status		Prepare new batteries. capacity. Replace with
	charged.
		new batteries.

15