Samsung Digimax U-CA Start up image, Avatar, Information, Avater S.Image S.Sound Backsetok

Avatar

Playing Back an Avatar

1.Press the PLAY ( ) button to select Play mode.

2.The last image taken will be displayed on the LCD monitor.

3.Use the LEFT and RIGHT buttons to select an avatar file for playback.

4. Press the PLAY/PAUSE (	) button. The selected	PLAY
avatar will be played.

-To pause playback of the avatar file, press the

PLAY/PAUSE ( ) button again.

-During avatar playback, press the LEFT or RIGHT button to rewind or fast-forward the avatar file.

-To stop playback of the avatar file, press the PLAY/PAUSE ( ) button, and then press the LEFT or RIGHT button.

INFORMATION

When selecting or playing back an avatar, please use the adapter (3.3V 2.0A) for the camera.

You can store as many avatars as memory capacity allows.

When the avatar is selected, the startup image will be replaced by the avatar.

Do not arbitrarily change the folder name of the Memory Stick Duo. If you do, the camera cannot recognize avatar files.

If you create an avatar from a video, the picture quality may deteriorate slightly.

Start up image

You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. If both the avatar and startup image are selected, only the avatar will be displayed. To view the startup image, cancel the selection of an avatar.

Setting Startup Image

1.In a mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select [MYCAM] menu tab.

3.Select [S.IMAGE] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

5.Press the menu button twice and the menu will disappear.

MyCAM

AVATER

S.IMAGE

S.SOUND

BACK:SET:OK

75