Samsung Digimax U-CA user manual Imprinting the recording date, Function lamp, Information

Imprinting the recording date

INFORMATION

The Date & Time are imprinted at the bottom right side of the still image.

The date will be imprinted as a DATE TYPE setting.

TIME is imprinted in the following way: [Hour : Minute : Second] and hours are shown using the 24 hour clock.

The imprint function is applied only to still images.

Function lamp

You can turn on and off the function lamp located on the front of the camera.

Setting the function lamp

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [LAMP] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

If [OFF] is selected	: The function lamp will not light up.
If [ON] is selected	: The function lamp will light up.

5. Press the menu button twice and the menu will disappear.

	SETUP
DATE
IMPRINT	OFF
LAMP	ON
BACK:	SET:OK

Description of the Function lamp

Function	Description
During power-on	7 color lights blink and then turns off when the camera is ready to take a picture
After an image is captured	The green lamp will blink once.
While recording a movie clip	The purple lamp will blink at a 1-second interval.
During voice recording	The blue lamp will blink at a 1-second interval.
When the self-timer is	Even if the function lamp is set to OFF, the self-timer LED will
activated	work. (See page 30.)

68