Intel SBCEFCSW Config command, activate config, backup, copy config source config destination

Config command

Manages the Fibre Channel configurations on a switch. For information about setting the port and switch configurations, see the “Set Config command” on page 29.

Authority

Admin for all keywords except List

Syntax

config

activate [config]

backup cancel

copy [config_source] [config_destination] delete [config]

edit [config]

list restore

save [config]

Keywords

activate [config]

Activates the configuration given by [config]. If the configuration is omitted, the currently active configuration is used. Only one configuration can be active at a time.

backup

Creates a file named configdata, which contains the configuration information. To download this file, open a File Transfer Protocol (FTP) session, log in with account name of images and password of images, and type get configdata.

cancel

Terminates the current configuration edit session without saving changes.

copy [config_source] [config_destination]

Copies the configuration given by [config_source] to the configuration given by [config_destination]. The switch supports up to 10 configurations, including the default configuration.

delete [config]

Deletes the specified configuration file where [config] is the file name.

edit [config]

Opens an edit session for the configuration given by [config]. If the configuration name is omitted, the currently active configuration is used.

list

Displays a list of all available configurations. This keyword is available with User authority.

restore

Restores configuration settings to an out-of-band switch from a backup file named configdata, which must be first uploaded on the switch using FTP. Create the backup file using the Config Backup command. Use FTP to load the backup file on a switch, and then enter the Config Restore command.

11